Tuesday, December 6, 2011

Linux: How to Install XFree86 Under Linux

XFree86 is a graphical interface under Linux (XWindow is the interface of the UNIX stations). To configure XFree86, just type "XF86Setup" in the command line; this entry is case-sensitive. A screen appears. You are prompted to enter information, which allows you to adjust the display. A graphical window is shown where you will find tabs to configure all significant elements of your computer. 
First, the mouse must be configured, which most of the time is a Microsoft type mouse (or PS/2, in case it is connected to a special port), on the port COM1 (or COM2). 
Generally, the keyboard need not be modified. On the other hand, please make sure to properly set the parameters of the video card since they directly affect the display and may cause a very unstable display in the case of any error (screen shaky, for example). 
Once all the parameters have been entered, quit the configuration program and return to the command line under the console. 
Just type "startx" to start X-Window Retweet this story

Monday, December 5, 2011

Ipad: How To Setup Matias Keyboard on Your Ipad

USB 2.0 Keyboard
iPad Setup Instructions.




1
Find the Settings app & tap it.

2
Tap on General. Then tap on Bluetooth.

If Bluetooth is off, tap the OFF button to turn it on.



3
Bluetooth will begin searching for devices...

4
Press the on/off button. A blue light will flash briefly to indicate that it's on.

Next, with a pen or pencil, hold down the pairing button until the blue light starts flashing.



5
When the keyboard appears, tap on Not Paired.

6
A message telling you the passkey will appear.

Type the passkey on the numberpad.Then press the Enter key



7
The keyboard is now connected and ready to be used.

8
To turn off the keyboard, press the on/off button. A yellow light will flash briefly to indicate that it's off.




Full-size & portable.
The Matias Folding Keyboard is a full-size Bluetooth Keyboard that folds in half for travel. Small enough to fit in your laptop bag, it's the ultimate keyboard for laptop users.
Comfortable, tactile feel.
High-quality dome switches give the keyboard a responsive, tactile feel, with enough resistance to hold the weight of your hands. This reduces long term fatigue and makes it a lot more comfortable to use.

Enhanced Number Pad


A Tab key on the number pad allows one-handed number entry into forms and spreadsheets, leaving your other hand free to hold or flip through information being entered.
Fast FN key.

We've taken your laptop's Fn key and injected some brains into it.
The Matias Fn key allows quick and easy access to keys that normally require a long reach – Arrow keys, Page Up, Page Down, Delete, and others can now be typed right from home row, without moving your hand.
Of course, you can still type those keys the normal way, but using Fn is faster – and it works on the main keyboard and the number pad.
Pump up (or down) the volume.
The keyboard also has the standard volume controls: Volume Up, Volume Down, and Mute – as well as function keys, page navigation keys, and cursor keys.





Retweet this story

How to Enable the Root User in Your Mac OS X

The most advanced tasks demand the most powerful user account of them all: the root user. When you log in as root, you have read and write privileges to every file on your Mac. This awesome power lets you override any account or permission restriction, but be careful! You could really mess things up if you don’t know what you’re doing.
Warning: The root account is disabled by default. To prevent accidents, you should only enable and utilize the root account when you absolutely need it.

Acting as Root with Sudo

Before you enable the root user account on your Mac, you should know about an alternative called sudo. As in other Unix-based operating systems, this command allows administrators to temporarily act as the root user in Mac OS X . Just open the Terminal application and preface a Unix command with sudo, as shown below.

Most commands can be executed with sudo, but you’ll need to authenticate with your administrator password to execute the command as root. System administrators consider usingsudo a best practice - you should always try using sudo before you log in as root!

Enabling the Root User Account

Ready to turn on your Mac's superuser account? Here’s how to enable the root user account in Mac OS X and set the password:
  1. From the Apple menu, select System Preferences.
  2. Select Users & Groups.
  3. Click the lock and authenticate with an administrator account.
  4. Select Login Options.
  5. Click Join, as shown in the figure below.
  6. Click Open Directory Utility. The Directory Utility window appears.
  7. Click the lock and authenticate with an administrator account.
  8. From the Edit menu, select Enable Root User.
  9. Enter the password for the root user in the Password and Verify fields.
  10. Click OK to enable the root user and save the password.

Logging in as Root

Now you can log in as the root user at the Mac OS X login screen. When the list of users appears, click Other, type root in the Name field, and enter your root password in the password field. You'll be logged in as root until you log out, restart, or shut down your computer.
Note: To log in as root from the OS X login screen, you must have automatic login and FileVault disabled. Follow the instructions in our How to Password Protect Your Mac tutorial.
If you're an expert at the command line and would rather not log in to your computer as the root user, you can enter the su command in the Terminal application. Enter the root user account password and you'll be acting as the root user for the duration of your Terminal session, or until you type exit.
Remember, you should only log in as the root user when absolutely necessary.

Disabling the Root User Account

Once you've used the root user account to flex your superuser muscles, you should consider disabling it for security purposes. Here's how to disable the root user account in Mac OS X:
  1. From the Apple menu, select System Preferences.
  2. Select Users & Groups.
  3. Click the lock and authenticate with an administrator account.
  4. Select Login Options.
  5. Click Join, as shown in the figure below.
  6. Click Open Directory Utility. The Directory Utility window appears.
  7. Click the lock and authenticate with an administrator account.
  8. From the Edit menu, select Disable Root User. The root user is now disabled.

Final Thoughts

These instructions are written for Mac OS 10.7 and 10.6. If your Mac is running an earlier version of Mac OS X, follow the instructions provided on Apple's Support  to enable the root user on your computer.
Retweet this story

How to Install Windows 7 on Your Computer

windows7

This step-by-step guide demonstrates how to install Windows 7 Ultimate. The guide is similar for other versions of Windows 7 such as Home Premium.
The best way to install Windows 7 is to do a clean install. It is not difficult to perform a clean installation. Before you start the installation process I recommend that you check Windows 7 System Requirements list to ensure that your hardware is supported by Windows 7. If you don't have Windows 7 drivers for all your hardware, it is a good idea to download all the drivers from the hardware manufacturers website and save all the necessary drivers on a CD-R or a USB drive before you start the installation.
Windows 7 DVD is bootable. In order to boot from the DVD you need to set the boot sequence. Look for the boot sequence under your BIOS setup and make sure that the first boot device is set to CD-ROM/DVD-ROM.
Step 1 - Place Windows 7 DVD in your dvd-rom drive and start your PC. Windows 7 will start to boot up and you will get the following progress bar.
Windows 7 pic1 - Click to enlarge
Step 2 - The next screen allows you to setup your language, time and currency format, keyboard or input method. Choose your required settings and click next to continue.
Windows 7 pic2 - Click to enlarge
Step 3 - The next screen allows you to install or repair Windows 7. Since we are doing a clean install we will click on "install now".
Windows 7 pic3 - Click to enlarge
Step 4 - Read the license terms and tick I accept license terms. Then click next to continue.
Windows 7 pic4 - Click to enlarge
Step 5 - You will now be presented with two options. Upgrade or Custom (Advanced). Since we are doing a clean install we will select Custom (Advanced).
Windows 7 pic5 - Click to enlarge
Step 6 - Choose where you would like to install Windows 7. If you have one hard drive you will get a similar option to the image below. You can click next to continue. If you have more that one drive or partition then you need to select the appropriate drive and click next. If you need to format or partition a drive then click Drive options (advance) before clicking next.
Windows 7 pic6 - Click to enlarge
Step 7 - Windows 7 starts the installation process and starts copying all the necessary files to your hard drive as shown on the image below.
Windows 7 pic1 - Click to enlarge
Step 8 - It will go through various stages of the setup and will reboot your system few times.
Windows 7 pic2 - Click to enlarge
Step 9 - When your PC reboots it attempts to boot from DVD as its the first boot device. Do not press any key during the boot prompt so Windows 7 will continue with the installation by booting from the hard drive.
Windows 7 pic3 - Click to enlarge
Step 10 - After the reboot your computer will be prepared for first use.
Windows 7 pic4 - Click to enlarge
Step 11 - At this stage you need to choose a user name and computer name. Click next to continue. The user account you create here is the Administrator account which is the main account for your Windows 7 that has all the privileges.
Windows 7 pic5 - Click to enlarge
Step 12 - Choose your password and password hint just incase you forget your password and need to jog your memory.
Windows 7 pic6 - Click to enlarge
Step 13 - You can now type the product key that came with Windows 7 and click next. If you do not enter the product key you can still proceed to the next stage. However Windows 7 will run in trial mode for 30 days. You must therefore activate Windows within 30 days otherwise you can not access your computer after 30 days.
Windows 7 pic1 - Click to enlarge
Step 14 - Help protect your computer and improve Windows automatically. Choose Use recommended settings.
Windows 7 pic2 - Click to enlarge
Step 15 - Review your time and date settings. Select your time zone, correct the date and time and click next to continue.
Windows 7 pic3 - Click to enlarge
Step 16 - Select your computer's current location. If you are a home user then choose Home network otherwise select the appropriate option.
Windows 7 pic4 - Click to enlarge
Step 17 - Windows will now finalize the settings for your computer and restart.
Windows 7 pic5 - Click to enlarge
Step 18 - After the final restart Windows 7 will start to boot up.
Windows 7 pic6 - Click to enlarge
Step 19 - Finally you have the logon screen. Just type your password and press enter or click on the arrow to logon to Windows 7 for the first time.
Windows 7 pic1 - Click to enlarge
Step 20 - After you have logged on to Windows 7 for the first time, you will see similar desktop to the image below. At this point you can start using your computer. However it may not be fully configured. You need to make sure that all the hardware is detected correctly and the necessary device drivers are installed. This can be done from the device manager.
Windows 7 pic2 - Click to enlarge
Step 21 - To go to device manager click - Start Menu -> Control Panel -> System and Security -> System -> Device Manager. You will see all your hardware listed as shown on the image below. You need to check if you have any yellow exclamation marks next to the name of the devices, similar to "Multimedia Audio Controller" on the image below. This indicates that the driver has not been installed for this device.
At this stage you can install the driver for this device. To do so, Right Mouse click on Multimedia Audio Controller -> Update Driver Software...
Windows 7 pic3 - Click to enlarge
Step 22 - You can choose to "Search automatically for updated driver software" or "Browse my computer for driver software". If you have the driver CD or if the driver is on a USB drive then choose "browse my computer for driver software". Window 7 will search and install the driver from the CD or you can locate the driver manually.
Once you have removed all the yellow exclamation marks from the device manager your Windows 7 configuration would be fully complete.
Windows 7 pic4 - Click to enlarge
Step 23 - Finally check if you have successfully activated Windows 7. Click Start Menu -> Control Panel -> System and Security -> System. You will get a window similar to the image below. Towards the bottom you will see Windows is activated followed by your product ID. This shows that your copy of Windows 7 is fully activated.
Windows 7 pic5 - Click to enlarge
Retweet this story

Sunday, December 4, 2011

How to install a Computer Motherboard

The first thing you should do is unpack your ATX case. Take off the cover of your case so that you can access the inside. Place the case on a desk so that you are looking down towards the open case. Your case should come with motherboard mounting screws. If your ATX back plate it not already fitted you can fit it by placing your plate near the ATX back plate cut out and pushing the plate outwards, it should clip on.
Now place your motherboard on top of the mounting screw holes. Make sure your ATX devices on the motherboard such as PS/2 and parallel port are facing towards ATX back plate cut out. Gently push your motherboard towards the cut out, every devices should fit easily into its corresponding cut out, as shown below.
The screw holes on your motherboard should align with the screw holes on your case. Place your screws that came with the case into the appropriate holes and gently screw it on using a screw driver.
The motherboard is now securely mounted to the case. You can now place the ATX power connector to the motherboard. Your ATX case should come with a power supply unit (PSU) and should already be mounted to the case. The ATX power connector is shown on image below.
Connect Main ATX Power Cable
Place the ATX power connector on top of the power socket on the motherboard. Push down the power connector and it should clip onto the socket. If you try to fit the power connector the wrong way round, it won't fit, it will only fit one way. So, if the power connector does not go in, it should go in the other way round.

Retweet this story

How to To Use The Print Screen Of Your Mac OS X

The following step below shows you how to do screen capture in Mac OS X.
  • Switch to the screen that you wan to to do screen capture
  • Hold down Apple key ⌘ + Shift + 3 and release all
  • then use your mouse to click on the screen
  • Done. You will see a picture file in at your desktop. That’s the screen capture picture.
You can also do a screen capture for a portion of your screen.
  • Switch to the screen that you wan to to do screen capture
  • Hold down Apple key ⌘ + Shift + 4 and release all key
  • Now, You will see the mouse cursor will change to +
  • You can start to drag your mouse to select the portion you wish to capture.
  • Once finish, you will see a picture file in at your desktop. That’s the screen capture picture!
If you want to do a screen capture for a particular application window, you can follow this:-
  • Switch to the screen that you wan to to do screen capture
  • Hold down Apple key ⌘ + Shift + 4 and release all key
  • Now, You will see the mouse cursor will change to +
  • Press the space bar once
  • You will see the mouse cursor change to a camera
  • Now you can use the camera to select which application window to screen capture
  • Once finish, you will see a picture file in at your desktop. That’s the screen capture picture!

Retweet this story

How to format external hard disk Usable For Mac and Windows

ou can format your external hard disk for Mac and Window. To format hard disk that usable for Mac and Windows, you need to select “MS DOS File System” for formating your hard disk.
To format your hard disk for Mac and Windows on Mac follow the steps below:-
  • Go to Finder -> Application -> Utilities
  • Double click for Disk Utility
  • Select the external Hard Disk you wish to format at the left column
  • Click on the Erase tab
  • At the “Volume Format” select “MS-DOS File System”
  • If you confirm to format your hard disk for mac and windows, Click on “Erase” button.
  • Pop up window will ask to verify the erase procedure. Click the erase button again in the window to start the erase process.
    * All the data in the external hard disk will be permanently removed after this steps.
  • Once the erase process finish, your external hard disk may be able to use in Mac and Windows.
P/S: This tutorial is also suitable for format thumb drive to be used on Mac and Window.
format hard disk for mac and windows, format hard disk, mac, window
Retweet this story